Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2018 Acura RDX will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going reasonable, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2018 Acura RDX light will go off after about 20-40 miles. If you travel to work over that payment and the light is still on, you will need to transport it in to Crown Acura Greensboro so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a detrimental sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we suggest that you pull over and contact Crown Acura Greensboro to help represent if your vehicle is secure to drive in or if we suggest a tow truck.

What could cause the check engine light to come on in a 2018 Acura RDX?

When your check engine light comes on, this could be as understandable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a precarious problem that could cause precarious damage to your engine and come with a enormous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow generally means something less precarious but a shining check engine light illustrates that your vehicle’s engine is in precarious trouble and service is essential rapidly. If your check engine light is shining in your 2018 Acura RDX, we very recommend not to drive the vehicle and schedule Acura service today. Below is a list of the most familiar reasons your check engine light can come on:

  • One of the most favorite and many cause is that your 2018 Acura RDX gas cap is loose, damaged or missing. The gas cap for your 2018 Acura RDX serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on abruptly after you put gas in your 2018 Acura RDX, authentic thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is low or dead. The battery in your 2018 Acura RDX is every basic. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Acura you commute, but check our favorite service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2018 Acura RDX if it’s not installed accordingly. These aftermarket elements and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound common, bring your RDX to Acura and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM elements authentic place might cost a tiny bit more but could save you money from having to get poor work and wear and tear caused by poor installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2018 Acura RDX’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is normally caused by neglected maintenance, which is why Crown Acura Greensboro offers a complimentary multi-point inspection with every Acura service. If you have an issue with your catalytic converter and don't get it repaired, your 2018 Acura RDX will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Acura RDX is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Acura RDX is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are essential for your 2018 Acura RDX. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, primary to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2018 Acura RDX's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the polite mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2018 Acura RDX has a vacuum leak. Every Acura RDX has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to imposing heat or extreme cool.

Is it safe to drive your 2018 Acura RDX with the check engine light on?

This question is not very definitive because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is naturally indicated by a natural glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more risky problem. If the check engine light is flashing, this means that there is a risky issue and it is recommended to service your Acura RDX immediately. Call the experts at Crown Acura Greensboro by dialing 3368142554 so you can describe the issues. Or reduce your speed and bring your 2018 Acura to our certified mechanics as soon as convenient.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2018 Acura RDX is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a mixture of things for your 2018 Acura RDX. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a lot. With that being said, the check engine light can mean a variety of assorted things. It can be as factual as your gas cap being loose or as admissible as engine knocking. If your check engine light is on in your 2018 Acura RDX, contact Crown Acura Greensboro. Contact Crown Acura Greensboro today! Our Acura service department can help you read what code is turning your check engine light on or diagnose why your check engine light is flashing.

2018 Acura RDX Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear noble away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your RDX. There are hundreds of singular codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling cooperative diagnostics will give you pleasant knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Regrettably, singular and accessible vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of achievable OBD codes, there are also hundreds of achievable reasons for the light, including:

  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • O2 Sensor
  • Fuel and air metering systems problems
  • Old Battery
  • Ignition system faults
  • Emissions controls issues
  • Computer output circuit issues
  • Transmission issues

This is why it is countless for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Acura mechanic. If the engine light comes on due to a hazardous concern, you risk bad your vehicle further by not repairing the issue honest away. Call Crown Acura Greensboro at 3368142554 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is customarily between $88 and $111. The suitable news, Crown Acura Greensboro offers complimentary multi-point inspections and free diagnostics, in most cases, to aid indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more perilous failure like a aggressive catalytic converter or a problem with one of the car's oxygen sensors, so it suitable to get the suitable code reading and diagnosis.

2018 Acura RDX Check Engine Light Flashing

Although there are several possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot respectable causes including something as friendly as a loose gas cap. Additional respectable reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name many. No matter what is the root cause of the Check Engine Light, we have the Acura Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Acura issue was fixed.

Every 2018 Acura RDX was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is mistaken nor what to do about it. That’s where we come in; Crown Acura Greensboro provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service skilled.

2018 Acura RDX Check Engine Light

A twinkling light indicates that the problem is strict and if not taken care of rapidly may result in dynamic damage to the vehicle. If the check engine light in your 2018 Acura RDX starts twinkling, that means that the problem needs prompt attention and your Acura should be brought in rapidly. This blinking light usually indicates a relentless engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously surge the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A aggressive, common or dirty spark plug can cause the engine to misfire. If your check engine light is blinking, please contact our company of automotive experts at Crown Acura Greensboro instantly by calling 3368142554. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Check Engine Light Service 2018 Acura RDX

What do you do when you’re driving along in your Acura RDX and suddenly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Acura owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2018 Acura RDX checked as soon as conceivable. Ignoring that warning could end up causing numerous damage to expensive engine components.

When your 2018 Acura RDX's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is designate with an computerized audit tool that is used by our Acura auto repair mechanics at Crown Acura Greensboro. There are also a number of rather inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to represent the issue and repair it.